Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






23 124

MICRO Combispeeder set, 6-piece.

NO 23 124
The MICRO-Combispeeder of long design offers a lever for direction change, 15° ring offset and Cap Stop technology.

The 72-tooth inner ring gear, made of special high alloy steel, allows ratcheting even when the spanner can only be moved through 5°. Nevertheless, the torque transmission capacity far exceeds the DIN/ISO standards and this enables the longer design. CrV steel shaft, chrome-plated, with a satin finish to pamper your hands. Clear, laser inscribed sizes avoid any confusion.

The 15° ring offset might make the turning over of the spanner impossible. For this instance, the direction change lever solves the problem. The spanner is ideally suited for working on flat surfaces, especially useful with the cap stop feature.

One each 10 - 13 - 16 - 17 - 18 and 19mm in a sturdy powder coated steel box.


The fully encapsulated drive is perfectly functional.


The extremely compact exterior measurements (A+B) and very slender head offer superior accessibility.


The Cap Stop technology: The Combispeeder flange prevents the spanner from dropping past the nut.

MICRO Combispeeder spanners can also be bought seperately.

MICRO Combispeeder (loose)

NO 23 130 8 mm
NO 23 131 9 mm
NO 23 132 10 mm
NO 23 133 11 mm
NO 23 134 12 mm
NO 23 135 13 mm
NO 23 136 14 mm
NO 23 137 15 mm
NO 23 138 16 mm
NO 23 139 17 mm
NO 23 140 18 mm
NO 23 141 19 mm
NO 23 143 21 mm
NO 23 144 22 mm
NO 23 146 24 mm