Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






23 800

SLIM-LINE Open-end spanners.
8-piece set complete with holder.

NO 23 800
To DIN 3110 and ISO 3318.

Supplied with a plastic holder with slot for each spanner and holes for attaching to a wall. All spanners clearly labelled to make them easy to find.

    Included in the set:
  • 6 x 7 mm.
  • 8 x 9 mm.
  • 10 x 11 mm.
  • 12 x 13 mm.
  • 14 x 15 mm.
  • 16 x 17 mm.
  • 18 x 19 mm.
  • 20 x 22 mm.
  • Polished heads: slim and thin walled. Torque characteristics still exceed DIN/ISO requirements.
  • Easy to hold, smooth finish without sharp edges and sides.
  • Dimensional tolerances are better than those required by DIN/ISO. Each piece is calibrated and checked.
  • Optimal surface protection against rust by means of double nickel and subsequent chrome plating.
  • Each spanner has a clearly marked place for storage. The plastic holder also offers holes to allow it to be fixed to a wall.

The table below shows all open ended spanners manufactured by Proxxon and can be ordered individually.
NO S1 x S2 B1 B2 L H
23 828 5 x 5.5mm 13 14 111 3
23 830 6 x 7mm 16 18 123 3.4
23 832 8 x 9mm 20 22 140 3.5
23 834 10 x 11mm 24 26 157 4.5
23 836 12 x 13mm 28 29 173 4.7
23 838 10 x 13mm 24 29 174 4.7
23 840 14 x 15mm 32 34 190 5.5
23 842 16 x 17mm 36 38 205 6
23 846 18 x 19mm 38 42 220 6.5
23 848 17 x 19mm 38 42 220 6.5
23 850 20 x 22mm 43 46 235 7.5
23 852 21 x 23mm 45 48 248 7.5
23 856 24 x 27mm 49 55 268 8.5
23 860 30 x 32mm 59 64 302 9.5
23 864 34 x 36mm 65 79 320 10
23 866 41 x 46mm 86 95 415 15

The specified B1, B2, L and H dimensions are within the tolerance required to meet DIN 3110.