Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






23 802

SLIM-LINE Open-end spanners.

NO 23 802
To DIN 3110 and ISO 3318.

Set of spanners supplied in a carton package.

    Included in the set:
  • 6 x 7 mm
  • 8 x 9 mm
  • 10 x 11 mm
  • 12 x 13 mm
  • 14 x 15 mm
  • 16 x 17 mm
  • 18 x 19 mm
  • 20 x 22 mm
  • 21 x 23 mm
  • 24 x 27 mm
  • 30 x 32mm
  • Polished heads: slim and thin walled. Torque characteristics still exceed DIN/ISO requirements.
  • Easy to hold, smooth finish without sharp edges and sides.
  • Dimensional tolerances are better than those required by DIN/ISO. Each piece is calibrated and checked.
  • Optimal surface protection against rust by means of double nickel and subsequent chrome plating.

The table below shows all open ended spanners manufactured by Proxxon and can be ordered individually.
NO S1 x S2 B1 B2 L H
23 828 5 x 5.5mm 13 14 111 3
23 830 6 x 7mm 16 18 123 3.4
23 832 8 x 9mm 20 22 140 3.5
23 834 10 x 11mm 24 26 157 4.5
23 836 12 x 13mm 28 29 173 4.7
23 838 10 x 13mm 24 29 174 4.7
23 840 14 x 15mm 32 34 190 5.5
23 842 16 x 17mm 36 38 205 6
23 846 18 x 19mm 38 42 220 6.5
23 848 17 x 19mm 38 42 220 6.5
23 850 20 x 22mm 43 46 235 7.5
23 852 21 x 23mm 45 48 248 7.5
23 856 24 x 27mm 49 55 268 8.5
23 860 30 x 32mm 59 64 302 9.5
23 864 34 x 36mm 65 79 320 10
23 866 41 x 46mm 86 95 415 15

The specified B1, B2, L and H dimensions are within the tolerance required to meet DIN 3110.