Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






23 810

SLIM-LINE Double ring spanners.
8-piece set.

NO 23 810
To DIN 838 and ISO 3318
with 75° offset heads.

Plastic holder with slot for each spanner and holes for attaching to a wall. All spanners clearly labelled to make them easy to find.

    Included in the set:
  • 6 x 7 mm
  • 8 x 9 mm
  • 10 x 11 mm
  • 12 x 13 mm
  • 14 x 15 mm
  • 16 x 17 mm
  • 18 x 19 mm
  • 20 x 22mm
  • Polished heads: slim and thin walled. Torque characteristics still exceed DIN/ISO requirements.
  • Easy to hold, smooth finish without sharp edges and sides.
  • Dimensional tolerances are better than those required by DIN/ISO. Each piece is calibrated and checked.
  • Optimal surface protection against rust by means of double nickel and subsequent chrome plating.
  • Each spanner has a clearly marked place for storage. The plastic holder also offers holes to allow it to be fixed to a wall.

The table below shows all combination spanners manufactured by Proxxon and can be ordered individually.
NO S1 x S2 B1 B2 L H
23 868 5 x 5.5mm 9 10 162 5
23 870 6 x 7mm 10 12 173 5.6
23 872 8 x 9mm 13 14 182 6.1
23 874 10 x 11mm 16 17 200 7.9
23 876 12 x 13mm 18 19 212 8.5
23 878 10 x 13mm 16 19 212 8.5
23 880 14 x 15mm 21 23 225 9.8
23 882 16 x 17mm 24 25 245 10.4
23 886 18 x 19mm 27 28 260 11.3
23 888 17 x 19mm 25 28 216 11.3
23 890 20 x 22mm 30 32 285 12.8
23 892 21 x 23mm 31 33 310 12.9
23 896 24 x 27mm 34 38 335 13.9
23 900 30 x 32mm 42 45 375 15.3

The specified B1, B2, L and H dimensions are within the tolerance required to meet DIN 838.