Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






23 812

SLIM-LINE Double ring spanners.

NO 23 812
To DIN 838 and ISO 3318.
With 75° offset heads.

Set of spanners supplied in a carton package.

    Included in the set:
  • 6 x 7 mm
  • 8 x 9 mm
  • 10 x 11 mm
  • 12 x 13 mm
  • 14 x 15 mm
  • 16 x 17 mm
  • 18 x 19 mm
  • 20 x 22 mm
  • 21 x 23 mm
  • 24 x 27 mm
  • 30 x 32mm
  • Polished heads: slim and thin walled. Torque characteristics still exceed DIN/ISO requirements.
  • Easy to hold, smooth finish without sharp edges and sides.
  • Dimensional tolerances are better than those required by DIN/ISO. Each piece is calibrated and checked.
  • Optimal surface protection against rust by means of double nickel and subsequent chrome plating.

The table below shows all combination spanners manufactured by Proxxon and can be ordered individually.
NO S1 x S2 B1 B2 L H
23 868 5 x 5.5mm 9 10 162 5
23 870 6 x 7mm 10 12 173 5.6
23 872 8 x 9mm 13 14 182 6.1
23 874 10 x 11mm 16 17 200 7.9
23 876 12 x 13mm 18 19 212 8.5
23 878 10 x 13mm 16 19 212 8.5
23 880 14 x 15mm 21 23 225 9.8
23 882 16 x 17mm 24 25 245 10.4
23 886 18 x 19mm 27 28 260 11.3
23 888 17 x 19mm 25 28 216 11.3
23 890 20 x 22mm 30 32 285 12.8
23 892 21 x 23mm 31 33 310 12.9
23 896 24 x 27mm 34 38 335 13.9
23 900 30 x 32mm 42 45 375 15.3

The specified B1, B2, L and H dimensions are within the tolerance required to meet DIN 838.