Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






23 822

SLIM-LINE Combination spanners. 21-piece

NO 23 822

To DIN 3113 and ISO 3318.
Ring head offset 15°.

Set of spanners supplied in a carton package.

    Included in the set:
  • 6 mm
  • 7 mm
  • 8 mm
  • 9 mm
  • 10 mm
  • 11 mm
  • 12 mm
  • 13 mm
  • 14 mm
  • 15 mm
  • 16 mm
  • 17 mm
  • 18 mm
  • 19 mm
  • 20 mm
  • 21 mm
  • 22 mm
  • 24 mm
  • 27 mm
  • 30 mm
  • 32mm.
  • Polished heads: slim and thin walled. Torque characteristics still exceed DIN/ISO requirements.
  • Easy to hold, smooth finish without sharp edges and sides.
  • Dimensional tolerances are better than those required by DIN/ISO. Each piece is calibrated and checked.
  • Optimal surface protection against rust by means of double nickel and subsequent chrome plating.

The table below shows all combination spanners manufactured by Proxxon and can be ordered individually.
NO S1 B1 B2 L H
23 905 5.5mm 9 14 93 3
23 906 6mm 10 16 100 3.4
23 907 7mm 12 18 110 3.4
23 908 8mm 13 20 120 3.5
23 909 9mm 15 22 130 3.5
23 910 10mm 16 24 140 4.5
23 911 11mm 17 26 150 4.5
23 912 12mm 19 28 160 4.7
23 913 13mm 20 29 170 4.7
23 914 14mm 22 32 180 5.5
23 915 15mm 24 34 190 5.5
23 916 16mm 25 36 195 6
23 917 17mm 25 38 210 6
23 918 18mm 28 38 216 6.5
23 919 19mm 28 42 230 6.5
23 920 20mm 30 46 250 7.5
23 921 21mm 32 45 245 7.5
23 922 22mm 33 46 270 7.5
23 924 24mm 36 49 280 8.5
23 927 27mm 39 55 310 8.5
23 930 30mm 44 59 340 9.5
23 932 32mm 46 64 360 9.5
23 933 34mm 50 70 380 15
23 935 36mm 54 74 410 18
23 937 41mm 61 84 460 21

The specified B1, B2, L and H dimensions are within the tolerance required to meet DIN 3113.