Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






24108

MICRO Miller FF 230

NO 24108

The headstock swivels through 360° indicated on a scale. Adjustment via hand wheel and dial (1 revolution = 1 mm, 1 division = 0.05 mm). Acts additionally as fine feed when milling or precise drilling. Quill and headstock may be locked in position, essential when milling. The powerful permanent magnet motor effects drive via a poly-v belt, yielding high torques, especially at lower speeds. Collets of 6, 8 and 10 mm are included. The solid steel table is T-slotted to the MICROMOT norm of 12 x 6 x 5 mm.

Technical Data:

  • 220 - 240 V. 140 W. 50/60 Hz.
  • Spindle speeds: 280 - 550 - 870 - 1,200 - 1,500 and 2,200 rpm are achieved by poly-v belt drive.
  • Quill travel 30 mm.
  • Column 35 x 400 mm.
  • Table 270 x 80 mm.
  • Travel X (cross) 170 mm, Y (length) 65 mm.
  • Size 180 x 130 mm.
  • Total height approx. 500 mm.
  • Weight approx. 17.0 kg.
  • Complete with KT 230.