Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






24320

MICRO Miller FF 500

NO 24320

A machining centre for milling, drilling and countersinking which has yet to meet its master. Made in Europe!

Milling head can be pivoted to the left and right by 90° (with degree graduation). Preset rotational speed by simple moving of Poly V-belt. Sleeve feed (30 mm) using drilling lever with scale ring (1 graduation line = 1 mm).

Tool holder using 6 - 8 - 10 and 12 mm collets (included). Extension height adjustment using hand wheel with scale ring (1 rev. = 2 mm). Solid, plane-milled compound table of steel with three continuous T-slots for size 8 standard T-nuts.

Technical Data:

  • 220 - 240 V. 400 W. 50/60 Hz.
  • Spindle speeds 180 - 350 - 550 - 800 - 1,300 and 2,500 rpm.
  • Throat (to spindle centre) 125 mm.
  • Column (120 x 100 x 420 mm)
  • Table 400 x 125 mm.
  • Traverse range vertical (z-axis) 220 mm, transverse (x-axis) 310 mm, depth (y-axis) 100 mm.
  • Total height max. 780 mm.
  • Weight approx. 47 kg.

Note:
The MICRO Miller FF 500 is also available as FF 500/CNC with CNC control of 3 tool axes, including recirculating ball spindles, step motors and user friendly WINDOWS-compatible software.