Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






27080

Hot Wire Cutter THERMOCUT

NO 27080

For architectural models, designers, decorators, artists, teachers, prototype makers as well as classical railroad, plane and boat model building.

The unit's double wound transformer and insulation to class 2 ensure that the cutter is absolutely safe. The cutting wire operates at 10 V, 1 A. The large base with 390 x 280 mm table with surface of Aluminium-Cobond ensures smooth and easy movement of the workpiece. The printed grid and protractor ease division and cutting. Solid aluminium overarm has a 350 mm throat and offers 140 mm in height. The holder and wire coil (30 m, 0.2 mm diameter is included) may be shifted along the overarm to enable mitre cutting. An LED indicates operation and helps prevent burnt fingers (the cutting wire heats to its maximum in less than 1 second).

Surface now made of Aluminium Cobond. For smooth and
easy movement of the workpiece. With printed grid and protractor.

Note: The correct temperature, being dependent on the material
and its thickness, is learnt from experience. Optimum profiles are
cut at lower temperatures and cutting force.

Technical Data:

  • 220 - 240 V, 50/60 Hz.
  • Transformer secondary max. 10 V at 1.0 A.
  • Temperature of cutting wire with 0.2 mm diameter adjustable from approx. 100 to 200° C.
  • Weight approx. 3.0 kg.
  • With class 2 insulation.