Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






27082

Hot Wire Cutter THERMOCUT 12/E

NO 27082

Also for cutting free in thick styrofoam panels for Diorama model railway construction.

Other application areas:

Architectural modelling, prototype construction, for designers and decorators. For fine work on construction insulation. And of course for classical model building.

No "crumbling" as found when working with knife and sandpaper!

Stable frame with pivotable fixing element at top and extendable lower wire fixing. Maximum total extension 200 mm. Maximum work piece height 150 mm. Cutting wire temperature infinitely variable: With a little practice, you can achieve optimum cuts depending on the material density and thickness. Usually at medium temperatures and without too much pressure. Heat-up time 1 second! Complete with five deformable cutting wires 285 x 0.85 mm.

Technical Data:

  • 12 V. 60 W. 50/60 Hz.
  • Cutting wire temperature controllable from approx. 150 - 350°.
  • We recommend MICROMOT mains adapters with a capacity ot 2.0 A for operation.
  • Polarity-protected system plug for MICROMOT mains adapters.