Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Email Us

Link Technology also market and sell the following products:


Disc Sander TG 250/E

NO 28060

Sands long edges, end sections, radii, mitres and by turning work piece over - accurate flat surfaces at right angles. Used on soft and hard woods, non-ferrous metals, steel, plastics (Plexiglass and fibreglass), cork and rubber. A simple chart indicates the recommended speeds on different materials.
Equipped with vacuum cleaner adapter for working in a clean, dust-free environment.

Sturdy construction: Main body of ribbed die-cast aluminium (not a steel tube or sheet metal construction). Table of die-cast aluminium with machined surface. Tilts 15° inwards and 45° outwards (a scale facilitates accurate adjustment). Table mitre gauge supplied as standard. Machined backing disc - driven by a twin ball bearing spindle. Standard, commercially available sanding discs fix firmly and can be replaced quickly. A dust collection adapter for attaching a vacuum cleaner/dust extractor is included.

Technical Data:

  • 220 - 240 Volt
  • Drive via toothed belt (reduction ratio 7.3:1).
  • Electronic speed control approx. 250 - 750 rpm.
  • Disc diameter 250 mm.
  • Max. sanding height 135 mm.
  • Table 275 x 105 mm (tilts 15° in, 45° out).
  • Overall size without table 330 x 280 x 230 mm.
  • Complete with mitre gauge and 2 each sanding discs of 100 grit and 240 grit.