Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






28070

Table Saw FKS/E

NO 28070

The ideal machine for straight, mitre and compound cuts. Usable on all wood types, non-ferrous metals, plastics (ABS, Pertinax, foam rubber) as well as rubber, cork, etc.

Even the smallest items may be cut cleanly, obviating subsequent finishing: a table indicates the recommended speeds for various materials. Substantial construction with load bearing parts of die-cast aluminium. Machined aluminium top measures 295 x 240 mm. A mitre slot and fence are provided. An extension wing is housed intregrally and pulled out to increase effective table width to 500 mm. Drive is effected via a special, quiet motor and optibelt. The blade arbor has ball bearings and is fitted with a TCT blade 80 x 1.6 x 10 mm (NO 28 734) as standard. Depth of cut is adjustable from 1 to 22 mm and the blade may be tilted through 45°.

Technical Data:

  • 220 - 240 Volt motor, 50/60 Hz.
  • Electronic speed control, with feetback effect for speeds of 4,400 - 6,800 rpm.
  • Overall size: 300 x 262 x 170 mm (without extension wing).
  • Weight approx. 5.2 kg.
  • Table size: 295 x 240 mm.
  • Depth of cut: 1 - 22 mm.
  • Uses all blades 50 - 85 mm diameter with 10 mm bore.