Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077
Email: Linktech@ihug.co.nz

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Wellington
Email Us

www.proxxontools.co.nz
103.232.226.155

Link Technology also market and sell the following products:






28512

Rotary Tool MICROMOT 50/EF

NO 28512

For model builders, electronic hobbyists, opticians, jewellery workshops, arts and crafts and much more!

For milling, drilling, routing, polishing, cutting, cleaning, brushing, de-burring, sawing and engraving steel, precious metals, glass, ceramics, plastic and minerals.

With keyless chuck and thyristor electronic speed control. Phase angle control and feedback effect circuitry yield high torques, even at low speeds. Slim, handy and light. The size of the machine dictates a 12 V drive system, use of a transformer is thus required. MICROMOT transformers of at least 1.0 A are recommended.

Note:
The MICROMOT 50/EF may optionally be fitted with MICROMOT steel collets. This is recommended for milling and machining with high lateral pressure in continuous operation. This ensures that the shanks cannot loosen even during long operating periods: Collets ensure higher concentricity and true-running work than keyless chucks.

Technical Data:

  • 12 V working.
  • Power consumption up to 40 W.
  • 5,000 - 20,000 rpm.
  • Keyless chuck for shank diameters from 0.3 - 3.2 mm.
  • Weight 230 g.