Imported and Distributed by Link Technology

Phone: + 64 (0)4-566-9699
Contact Owner: Harry Memelink
Mobile: + 64 (0)21-586-077

C/O Unit 1
408 Hutt Road,
Alicetown, Lower Hutt 5010
Email Us

Link Technology also market and sell the following products:


Jig Saw STS 12/E

NO 28534

Ideal for curved cuts in wood (to 10 mm), corrugated boards (to 3 mm) and non-ferrous metals (to 2.5 mm). Equipped with a powerful 12 - 18 Volt five-pole motor. Power consumption 100 Watt, max. 6 mm stroke. Number of strokes may be adjusted between 2,000 and 5,000 per minute. Stable housing of fibreglass reinforced POLYAMIDE. Includes two saw blades (coarse and fine). We recommend MICROMOT mains units from 2.0 A for powering the saw.

Note: Now with additional small, rounded foot. For clean interior cuts on curved surfaces. To be exchanged against the normal footplate by simply releasing a screw.